The vessel is currently sailing in the Caribbean (Aruba —> Colombia —> Panama soon). Delivery is certainly an option depending on timing/location. I'm including a lot of information below, please reach out with any questions or for more photos! Built in late 1987 by Prout Catamarans Ltd. on Canvey Island, Essex, UK. She was completed to their standard specification with many owner-requested extras and was launched in 1988, hull number 315. She is one of only two 37 Elites fitted with the high performance double spreader Zspars rig which is exceptionally strong. With a deck mounted inner forestay it allows her to carry a larger staysail, which improves power and speed upwind and reaching. The rig was discontinued on later hulls due to the extra building costs.   SPECS Registration: USCG Length overall: 11.3m 37'0" Length waterline: 10.3m 33'11" Beam: 4.95m 16'3" Draught: 0.85m 2'8" Air draught: 14.6m 47'11" Displacement: 5,216kg 5.13t Engine: Yanmar 3HM35F 25.4kW (34hp) Diesel tank: 155l (approx 40 US gal) Freshwater tanks: 2 x 225l (approx 120 US gal) Holding tank: 110l (approx 28 US gal)   SAILS Dimensions: Foresail - I=13.22m, J=5.62m Staysail - IY=9.30m, JY=3.9m Main - P=11.66m, E=3.27m   Genoa - 38.1 sq m roller reefing, Jeckells (2018) Staysail - 12.6 sq m roller reefing, Jeckells (2018) Main - 19.1 sq m Jeckells (2018), with 2 deep slab reefs and Cunningham (all the above in Marblehead fabric to Jeckells' Heavy Duty Performance Cruising spec) Genaker - approx 74 sq m Crusader, with ATN snuffer Riding sail - Jeckells, with brass piston hanks Main stacker - zip-up Pack-a-main cover with lazyjacks, separate for'ard cover   MACHINERY Engine: Yanmar 3HM35F 3 cylinder diesel with freshwater cooling Engine hours - 3746 Exhaust: Water cooled with stainless steel injection elbow, Vetus waterlock and muffler HMI exhaust temperature alarm Gearbox: KBW10E Shaft coupling: Metalastic flexible coupling new R and D double flexible coupling as spare Outdrive: Silette Sonic Catdrive II with spiral bevel gears (fully overhauled 2022) Propeller: 15" x 12" 3 blade installed; 15" x 10" 3 blade as spare Engine controls: Morse MN gear and throttle control Engine panel: Yanmar, including rev counter, oil pressure, temp, engine hours Steering gear: Seastar hydraulic system, ram in aft cross beam drives rudder arms via link  Raymarine Autopilot drives hydraulic pump within the system The steerable Catdrive is controlled by Morse D2 lever Hydrovane provedes emergency steering Diesel tank: Stainless steel under cockpit grid - 155 litres. Consumption: 1.8 litres per hour at cruise (2/3) revs Spares: Comprehensive (see inventory) including gaskets, seals, propellers for both leg and outboard, bearings, seals and gaiters for leg, water and fuel pump kits/seals, alternator. Outboard motors: - Tohatsu 9.8 2 stroke         - Yamaha 2hp 2 stroke Dinghy: 3.1M Carib rigid fiberglass hull   INSTRUMENTS Satellite Wifi: Starlink Fixed VHF: Cobra MRF55EU Metz Manta antenna at masthead, Aircell 7 low loss cable (2017) Portable VHF: Icom M23 Car radio/CD: Pioneer DEH_P41005D Receiver EPIRB: ACR GlobalFixPro RLB-37 Man overboard: Kannad Safelink R10 AIS beacon Ocean Signal MOBI AIS beacon Raymarine Lifetag system - 2 tags and base station AIS (all 2017): Vesper Watchmate WMX850 transceiver. Dedicated Metz antenna on aft pole, RG8X marine cable. Vesper SP160 AIS/VHF splitter allows use of either masthead or pole antenna by either VHF or AIS sets. RTE: Echomax dual band active radar target enhancer, mounted at masthead (2017) GPS: Furuno GP32 and Garmin GPS152H (both at nav station) Garmin GA30 antenna on aft pole, Furuno puck antenna for'ard on coachroof Garmin GNX20 Multi Function Display (2019) set up as GPS repeater in cockpit Portable Garmin GPS 72H Wind: LCJ Capteurs CV7 ultrasonic sensor (no moving parts) at masthead with Raymarine ST60+ analogue display and digital repeater Depth: Raymarine i50 display with Airmar P79 transducer Speed/log: Raymarine ST60 display with Airmar CS4500 ultrasonic transducer (no moving parts) Compass: Plastimo Olympic 100 (2018) flush mounted on binnacle Autopilot: Raymarine Smartpilot S2 with hydraulic pump Raymarine P70 Autopilot Control Head (2019) Data: Actisense NDC-4 multiplexer, feeds GPS, AIS and wind data to repeaters, autopilot and computer plug (RS232 D-sub or USB), while maintaining independent functionality. GPS feed to NDC-4 is via a switch box which allows direct connection to eg a computer. Victron solar panel controllers are cabled via a selection switch to a plug at the chart table for connection to a computer. Weather and time: Cabin clock and matching barometer, hygrometer, thermometer.   ELECTRICAL (batteries and charging) All wiring in generously sized tinned boat cable (2017) Batteries: Domestic bank- 560ah lithium (lifePo4) Alternator: Lucas A127 (70A) Adverc advanced regulator Shore power: Pro mariner 40 Solar: 4 Photonic Universe black 100W panels with 2 Victron Blue Solar MPPT 75/15 controllers (all 2017).                                 -620W panels to 100/50 to mppt charger          -320W panel to 100/30 mppt charger                       Roughly 1350W total Monitoring and bank control: Merlin Smartgauge and Smartbank Advanced (2017) Adverc Circuit Monitor DCMIII Electrical - shorepower Connection: Hubbell 250V 16A deck inlet 3 shore power leads with various connectors - EU, UK and USA Isolation: Axon AC shorepower distribution panel, polarity indicator and polarity changeover switch Safesure GI70 galvanic isolator Distribution: 4 switched socket outlets (3 x UK, 1 x EU) Inverter: 2500W 110v and 500W 110v   ELECTRICAL - lighting, small power, appliances Most wiring in Ancor tinned boat cable (2017) Navigation lights: LED tri/anchor, port, starboard, stern and steaming lights Internal: LED lights throughout DC sockets in saloon, nav station and aft cabin External: Hella LED deck floodlight (combined with steaming light) Waterproof sockets in cockpit and foredeck locker for lights/small power Appliances: 4 Hella 12v fans 2 pedestal fans 240v and 110v PLUMBING - fresh water Water heater: 20 litre calorifier, with immersion heater, plumbed into engine fresh water cooling system Pressurized system: Jabsco 36950-2200 pump primary filter Jabsco Aqua Filter Hot and cold to galley and main head, cold only to second heads Drinking water via Nature-Pure QC sub-micron filter to separate tap at galley Whale Swim/rinse deck shower (unfiltered cold only) on aft deck Desalinator: Katadyn 80E, 13 l/h, plumbed in to skin fittings and port tank, pickled and not recently used PLUMBING - salt water Hand: Whale Gusher Mk3 foot pump at galley Washdown: Parmax 3 pump, portable, with suction/delivery hoses and power cable to suit sockets in cockpit or foredeck locker PLUMBING - drainage Basins and sinks: discharge to skin fittings Internal nacelle compartment: Can be drained into engine room bilge via stop valve Cockpit: Central drain discharges to sea Main bilges: 2 Johnson L650 electric pumps, discharge through transom 2 Henderson V hand pumps, operated from cockpit, discharge to skin fittings Aft bilges: (Aft buoyancy chambers) 2 Rule electric pumps, discharge via aft cross beam Shower bilge: Rule IL200P electric pump, discharge to skin fitting Engine room bilge: Whale Supersub 500 electric pump discharge through transom Stirrup hand pump ditto Emergency: Rule 200P roving electric pump Sewerage: In the main head a Lavac/Henderson V pump discharges either direct to sea or into a stainless steel holding tank. Discharge from tank to sea via the same pump or to a pump-out connector on deck. In the second head the Jabsco pump discharges to sea. GAS Installation: 1 x 13kg steel cylinder (Portuguese fitting) 1 x 7.7kg (17lb) Viking composite cylinder (USA POL fitting) 1 x 5kg (11lb) Trident Aluminium cylinder (USA POL fitting) Gasboat 4408/R marine regulator with manual changeover valve (2017) Alde bubble tester Nereus Power Saver gas solenoid valve, operated from saloon Rigid pipe to galley area, tap and flex hoses to hob and oven various pigtails and adapters to suit most cylinders Cooker: ENO stainless steel three burner hob; oven and grill REFRIGERATION Fridge Frigomatic K35F keel plus air cooled Keel cooler for normal afloat operation Air cooled condenser for use when out of the water (Evaporator, filter drier, thermostat and speed regulator new in 2017) Freezer  Bodega 12v freezer   DECK GEAR + CANVAS Cockpit grating: Teak grid Cockpit tables: Solid surface engine room hatch folds out LAGUN swivel table with two fixed mounts and solid surface top Vane gear: Hydrovane (2017) with long shaft and XT adjustable vane Offshore spares kit Ensign staff: Pine, holder on starboard pushpit Liferaft: Plastimo TransOcean - 4 man in rigid container (2008, serviced Sept 2018) Lifebuoy: Circular, with Sirius light, with bracket fixed to port pushpit MOB recovery: Lifesling MOB recovery ssystem Tribuckle MOB recovery sling Danbuoy: IOR standard danbuoy, with tube mount on port pushpit Jackstays and tethers: 2 nos. webbing jackstays 3 long tethers (dynamic climbing rope) for cockpit, aft deck and foredeck 2 short tethers (for side decks) Mast steps: Alternating step nylon webbing mast ladder (hoisted in luff groove) Two fixed fold-out mast steps near masthead Bosun's chair with 2 Petzl ascenders Boathooks: 1 no. pine, 1 no. aluminium Winch handles: 2 nos. Lewmar 200mm locking Bimini/cockpit enclosure: Stamoid Top canvas with Strataglass windows and two sets of zip attached side and aft panels, one with windows and one with mesh screens Fitted cockpit cushions Awnings and sun protection: Acrylic canvas PU treated awning under boom/over bimini Acrylic canvas PU treated awning over main coachroof hatches Canvas awning over aft deck zips on to aft of bimini Pop-on external sun screens for windows Elasticated canvas sun screens to all hatches   GROUND TACKLE/ETC. Bower anchor: 20kg Rocna (2017) 50m of 8mm Aqua 7 grade 70 calibrated chain spliced to 50m of 16mm anchorplait polyester Kedge anchor: Fortress FX23 5m of 10mm chain spliced to 75m of 16mm nylon anchorplait Drogue: Seabrake GP30L 3m of 10mm chain, 50m of 16mm low stretch braided polyester with bridle Spare anchor: 15 kg Delta Spare rode: 60m of 16mm multiplait Bridle: approx 12m of 12mm nylon 3 strand with central chain hook Snubber: 6m of 12mm nylon 3 strand spliced to chain hook Windlass: Lofrans Kobra 1000W, reversing, controls at helm and on foredeck Hawse fittings: Purpose made (fits Rocna) pivoting roller set, self launching and stowing Single roller fairlead for second bower Mooring warps: Too varied to list! Fenders: 15 nos. 200mm dia ,some with socks 5 nos inflatable   Hulls, deck and fixtures Hulls below waterline: GRP. Coppercoat over epoxy resin barrier on sanded gelcoat (2018) Seacocks etc: Forespar Marelon to heads inlets/outlets (2018), DZR skin fittings and valves elsewhere. Keel cooler - see under Mechanical and Electrical Topsides: GRP painted some years ago - cockpit,deck and coachroof areas will benefit from repainting   Guarding: Pulpits and pushpits: Stainless steel (remounted with new bolts 2017). Stanchion bases: aluminium (2017) Stanchions: stainless steel (2017) Guardwires: 5mm stainless steel (2017) Tabernacle: Stainless steel, with roller halliard fairlead to cockpit Chainplates: Stainless steel Grab rails etc: Coachroof grab rails, stainless steel (2017) For'ard hatch (portlight) guards, stainless steel (2019) Anchor gear: 2 aluminium hawse leads (one with self launch bow rollers for Rocna 20) Lofrans Kobra reversing windlass, deck mounted Mooring cleats: 2 nos. aft, 3 nos. for'ard, 2 nos. midships, all aluminium Sheeting tracks etc: Genoa - 2 nos Harken 32mm CB tracks, through bolted (2019) Staysail - Barton T track through bolted (athwartships - self-tacking) Main - Barton 'I' section 28mm, through bolted 2 genoa sheet turning blocks aft Jackstay points: 4 nos. stainless steel U bolts through coachroof/deck Tether anchorages: 2 nos. stainless steel U bolts on foredeck and in cockpit Saloon door: Hinged folding teak (with Perspex windows 2017) Windows: 10mm and 8mm Perspex (2017) Coachroof hatches: 2 large and 4 small Lewmar low profile (2017) Escape hatches (aft): 2 large Lewmar low profile (2017) Aft cabin portlights: 2 nos. (open into cockpit) Locker lids: Foredeck 2 nos., cockpit floor 2 nos. GRP Engine room hatches: Cockpit - solid surface hatch lid (2017), can be used as table Aft deck - GRP hatch Aft pole Stainless steel pole, for satellite broadband and other antennae (2018) Rudder protection Stainless steel Boarding ladder: Stainless steel fold-up ladder Liferaft mount: Stainless steel frame and chocks Danbuoy holder: Aluminium tube Cockpit enclosure: fold back 4 hoop stainless steel frame Hydrovane mounts: bases on fitted UHDP plates through bolted with large backing plates internally to crossbeam and transom Leg mounting: Aluminium transom plate for Silette Catdrive II through bolted to central pod transom Sheet winches: 2 x Barlow 25ST; (new bearings, pawls and springs 2018) Furling line winch: Lewmar 16ST; double Spinlock jammers Halyard winch: Lewmar 16ST